Things To Look Out When Selecting Veneer Doors

It is true that the use of the veneer doors is not very familiar to most people when it comes to types of wooden doors. Coming from the days of ancient Egypt the use of the veneer wood is huge. As the use of wood is limited, people tried to use it for all sorts of practical use for their homes.

In the 20th Century, the veneer production has maximized for the modern door making and wood working industry. With new technologies, the use of veneer wood for doors happens to be efficient.

Veneer doors are an ideal alternative to expensive solid wood doors. They are able to convey all the beauty of natural wood and give the interior a special style.

Veneer wood advantages

For the manufacture of veneered doors, natural wood is used, but in much smaller quantities. As a result, the price of the product becomes much lower, but the appearance remains expensive and noble.

Doors are veneered by applying thin cuts of natural wood to the MDF board. For these purposes, solid mahogany, oak, maple, walnut, etc. are used.

More advantages of veneer doors:

  • The doors have an expensive appearance and a unique style.
  • Natural material gives the door a natural look.
  • Veneer is completely safe and environmentally friendly.
  • A protective layer is applied to the veneer, which increases the wear resistance of the door. As a result, it is difficult to scratch and chip.
  • The protective varnish protects the wood from the negative effects of moisture.
  • Large assortment and low cost.
  • Ease of construction.

Tips for choosing a veneered door

In order for the door to serve for many years, during the purchase, you need to pay attention to certain parameters:

The first thing to check with the seller before buying is the manufacturer’s data and quality certificates. In most cases, the corporate logo guarantees that the door was manufactured in compliance with all requirements on good equipment.

The wood pattern cannot be repeated at two different doors, since such a coincidence does not occur in nature.

If the pattern is indistinct and vague, then this indicates the use of low-quality wood. Most often they try to disguise such imperfections with the help of tinting varnish.

The lacquered surface of a veneer door must be free of stains, cracks, chips and dents.

Often, door flaws are revealed when checking the end sections. The veneer should hold firmly to the surface and not move away with the slightest effort to lift it. There should be no curvature of the end lines, as this indicates poor-quality drying of the wood, which will contribute to the deformation of the frame.

  • A persistent chemical smell indicates that the door was treated with a cheap primer and poor quality varnish.
  • When measuring the length from one corner to the second diagonally, it should be the same with a maximum deviation of 1 mm.
  • Fasteners for glass inserts must be of high quality and reliable.
  • With gentle shaking the door was not should rattle and vibrate, since it talks about not secure location.

Tips for caring for veneered doors

Veneer is considered a demanding wood material that needs special care. Do not clean the doors with aggressive chemicals, as they can damage the structure of the coating. To remove dirt, you need to use special aerosols or a solution of soapy water. After processing, wipe the door dry with a cotton napkin.

Make a visit to to find out more details about veneer doors and prices in Singapore today.

Dom Dannis Author